|
|
| Home | » Products | » Fiber products | » FRP Accessories |
We are touching the heights of success in this market by offering FRP (Fibre-reinforced plastic) Accessories. The provided accessories are used in doors, partitions, ceiling boards, furniture, windows, etc. The offered accessories are precisely manufactured at our highly developed production unit using superior quality raw materials and modern technology in conformance with set international market norms. In addition, we provide these FRP Accessories to the clients in different specifications as per their demands at the most competitive prices.
Features:
Enhanced durability
Easy to install
Light weight
Accurate dimension
Fiberglass/Polyester Wood grain Textures, Printed, coloured Tissues and Logos are the latest international Innovation with respected to Surface Finishes of FRP/GRP Modulings.FRP accessories has perfected this development and we are actively engaged in further improvements, introducing new designs, and promotional work.
Wood grain Textures, Printed, Coloured Tissues and Labels/logo, developed by FRP Accessories opens up an entirely new perspective for surface finishes for the following identified usages with additional Possibilities.
Partitions, Roofing Sheets, Panels, Ceilings Boards and Translucent Ceilings Panels.
Casings for water Coolers, Desert Coolers etc.
FRP Cladding for pillars, form work,
Furniture
Doors, Windows.
Cupboards & Cabinets, TV cabinets
Tube Light Translucent diffuser Covers,
Interior Cabin skirtings, well Dividers, Cornices,
Defence Items - Helmets, Boat Exteriors, Vehicle Parts, High Altitude Huts and Shelters.
Customized Brand Labels/Logos to be incorporated on FRP Molded Products.
Signboards.
Wood grain Textures and Printed Tissue Display similar laminating properties as Fiberglass Surfacing Veils/Mats in terms of Wet-Out, Glass/Resin ratio, Drape, Pliability and Porosity.
The Colour / dyes are light stable, will not smudge when laminating and are compatible with Polyesters Resins. Trials conducted in India show Fiberglass wood grain Textures, Printed & Coloured Tissues to conform to contours, without entrapping air bubbles. Glass to Resin ratio can be varied from 1:6 to 1:10 as required. Unlike Plywood veneers FRP/GRP with these textures can be molded as Rounds, Ovals, Elipticals and other Smooth Curvatures.
Given the same Wood grain Texture, Printed, coloured Tissue and Labels/Logos, a range of laminate surface finishes and tints can be achieved by monitoring the would finish from matt-gloss glassy. Also by varying the ratio of pigment blends in he laminating resin of the backup CSM layers, optimum laminate tints can be obtained as required by the end user.
Presently FRP Accessories have for ready supply in their range of Fiberglass Wood grain Textures, Printed & Coloured Tissue, and the following Designs/Shades/Colours.
| Wood Grain Textures | |
|---|---|
|
 |
|
Printed Tissues |
Colour Tissue |
Logos/Labels |
|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Design Printed and Colours will be added on as required.FRP Accessories invites enquiries for such development.
Guidelines for using Fiberglass Wood Grain Textures, Printed Tissue and Coloured Tissue in Hand Lay ââ€â€šÃƒÂ´ up.
Finish the would to mat or glossy or glassy finish as required.
Apply Release agents Wax, PVA as normally done
Spray or Brush apply a liberal coat of Rooflite grade or clear GP grade Resin.
Lay the Fiberglass Wood grain Texture/Printed Tissue/Coloured Tissue. Ensure its wet out on immediate contact without folds or wrinkles. Brush stippling can be done by vertical stippling. Do not undertake forward to backward brush movements as this will displace the fibres and the design.
Wet out the fiberglass texture thoroughly with additional clear Resin and allow to cure to touch tackiness.
Build up to the required thickness with Fiberglass chopped Strand Mat or Woven Roving layers thoroughly impregnated with pigmented Orthopthalic Resin for Colured Opaque Laminates/Mouldings or Rooflight Resins for Translucent End uses.
Roll lightly only if necessary and allow to cure.
SPECIFICATION, CHARACTERISTICS AND APPLICATION
These Tissues are used in the Surface layers of FRP Products to combine the essential needs of a Resin rich layers with the aesthetics, design and colour of the FRP moulding.
|
|
|
|
|
|
To comply with the needs for Hand lay- up the Mat/Veil/Tissue is technically monitored in terms of fibre Characteristics binder content and stainer/dye curib0ng and fixing. So that it obeys mould contours with quick resin impregnation. These textures are engineered for Hand lay-up right from the fibre characteristics, binder and stainer as well as fibre distribution.
If one followings our Technical Note the textures are capable of enhancing the surface finish as well as the under layers of the FRP Moulding to high aesthetic levels of appearance and finish so as to create high gloss/high matt surfaces with improved strength and corrosion resistance.
If one followings our Technical Note the textures are capable of enhancing the surface finish as well as the under layers of the FRP Moulding to high aesthetic levels of appearance and finish so as to create high gloss/high matt surfaces with improved strength and corrosion resistance.
|
Weight 30gms/sq.mtr. |
Binder content 7% |
|
Resin wet out time 10 seconds |
tensile strength 20 Newton/5cm |
|
Mositure content 2% maximum |
Width 1 metre |
|
Colour fastness to light as tested by BTRA |
5-7 i.e. very good to excellent |
|
Wood grain Textures |
|||
|---|---|---|---|
|
Rosewood |
Teakwood |
Golden Glory |
Copper Glory |
|
Sandalwood |
Yellow Teak |
White Cedar |
Fluted Cedar |
|
Brown Maple |
White Maple |
Exotics |
Lush ivory |
|
Decorative Textures |
|||
|---|---|---|---|
|
Enviro Green |
Enviro Brown |
Enviro Blue |
Enciro Orange |
|
Shadow Grass |
Camouflage |
Camouflage-1 |
Camouflage-2 |
|
|
Brick Wall |
Bamboo |
|
|
Marble Textures |
||
|---|---|---|
|
Dark Ivory |
Yellow Fantasy |
Kryptonite |
|
Baroda Green |
Pink |
Sandstone |
 |
